Why use a gravity feed system? Due to the strong pressure in vacuum systems some dust or bigger paint particles that you want to filter out are pushed through the filter by the intense pressure. Colad Snap Lid System is a gravity feed system allowing all particles to be filtered out while spraying. A gravity feed system allows a continuous and constant material output as well, since it is based upon the original spray gun designs and engineering. Colad Snap Lid System Paint application system The Snap Lid System is a paint application system invented so you can do what you do best. Your mixing cup is your paint cup. Connect your favorite spray gun. Use any type of paint. Stay in the flow. Fastest system; save time and money by using the mixing cup as a paint cup Easy-to-use; complete system with attuned components For all types of paint; four filters available for clear coatings, waterborne coatings, conventional based coatings and primers. Unique valve system; prevents a vacuum and allows a stable paint flow Reinforced lid; for fast and easy closure and leak prevention Secure and tight thread; for a stable and watertight connection to the spray gun For all types of spray guns; matching adapter for almost all types of spray guns Mix, Snap & Go! Let's make it simple Are you ready to speed up your paint process and achieve high-quality results? Our Snap Lid System offers the fastest and easiest solution for preparing and spraying paint. Lay it on thick or thin Snap Lid System is suitable for any type of paint, thanks to the four different types of filters. Use one system for clear coat, waterborne & conventional base coat and primer. With Snap Lid System you can choose the right micron filter for the desired paint result. Size does matter Colad Snap Lid System comes in different sizes, making it a paint application system suitable for every job. With our medium cup for smaller paint surfaces, our standard cup for average paint jobs and the large cup for the big jobs there's an efficient solution for every paint job. 90 Micron Strainer Used for: Clear Coat 130 Micron Strainer Used for: Base CoatWaterborne 190 Micron Strainer Used for: ConventionalBase Coat 280 Micron Strainer Used for: Primer Frequently Asked Questions How can I achieve optimum output flow? To get the best output from Colad Snap Lid System you should prevent too much air remaining between your spray gun and the built-in filter. This can be done by slowly tilting the gun after attaching the paint cup, in order to let the air out and the paint in, or by tilting the gun back and forward and release a bit of output. Once the transparent part of the lid between the filter and the spray gun is over 2/3 filled with paint, you will achieve the best paint flow. Can I refill the Colad Snap Lid paint cup? Colad Snap Lid System can be refilled by gently lifting one side of the lid, adding more paint and reattach the lid as recommended. We don’t advise to refill more than once. If you have a certain time in between before re-using, we’d advice to use a clean snap lid. How can I store leftover paint with Colad Snap Lid system? Replace the Snap Lid by one of our Snap Lid Sealing Cap to prevent your paint from lint and debris during a break. 88 ml / 3 fl oz. 350 ml / 11.8 fl oz. 700 ml / 25 fl oz. 700 ml UV / 25 fl oz. 900 ml / 30.4 fl oz. Buying Options Buying Options Buying Options Add to Cart Buying Options Price — no data — no data $93.43$93.43 $54.51$54.51 — no data Spot Repair ✓ no data no data no data no data Small Jobs no data ✓ no data no data no data Regular Job no data no data ✓ ✓ ✓ Big Job no data no data no data no data ✓ UV Cured Coatings no data no data no data ✓ no data